10 USC Ch. 384: MANUFACTURING TECHNOLOGY

From Title 10—ARMED FORCESSubtitle A—General Military LawPART V—ACQUISITIONSubpart I—Defense Industrial Base

CHAPTER 384—MANUFACTURING TECHNOLOGY

Sec.

4841.

Manufacturing Technology Program.

4842.

Joint Defense Manufacturing Technology Panel.

4843.

Manufacturing engineering education program.

4844.

Manufacturing experts in the classroom.

4845.

Armament retooling and manufacturing.

Editorial Notes

Amendments

2021—Pub. L. 117–81, div. A, title XVII, §1701(p)(2)(A), Dec. 27, 2021, 135 Stat. 2148, amended Pub. L. 116–283, div. A, title XVIII, §1869(a), Jan. 1, 2021, 134 Stat. 4283, which added this analysis, by adding items 4843 to 4845 and striking out former item 4843 "Armament retooling and manufacturing".

§4841. Manufacturing Technology Program

(a) Establishment.—The Secretary of Defense shall establish a Manufacturing Technology Program to further the national security objectives of section 4811(a) of this title through the development and application of advanced manufacturing technologies and processes that will reduce the acquisition and supportability costs of defense weapon systems and reduce manufacturing and repair cycle times across the life cycles of such systems. The Secretary shall use the joint planning process of the directors of the Department of Defense laboratories in establishing the program. The Under Secretary of Defense for Research and Engineering shall administer the program.

(b) Purpose of Program.—The Secretary of Defense shall use the program—

(1) to provide centralized guidance and direction (including goals, milestones, and priorities) to the military departments and the Defense Agencies on all matters relating to manufacturing technology;

(2) to direct the development and implementation of Department of Defense plans, programs, projects, activities, and policies that promote the development and application of advanced technologies to manufacturing processes, tools, and equipment;

(3) to improve the manufacturing quality, productivity, technology, and practices of businesses and workers providing goods and services to the Department of Defense;

(4) to focus Department of Defense support for the development and application of advanced manufacturing technologies and processes for use to meet manufacturing requirements that are essential to the national defense, as well as for repair and remanufacturing in support of the operations of systems commands, depots, air logistics centers, and shipyards;

(5) to disseminate information concerning improved manufacturing improvement concepts, including information on such matters as best manufacturing practices, product data exchange specifications, computer-aided acquisition and logistics support, and rapid acquisition of manufactured parts;

(6) to sustain and enhance the skills and capabilities of the manufacturing work force;

(7) to promote high-performance work systems (with development and dissemination of production technologies that build upon the skills and capabilities of the work force), high levels of worker education and training; and

(8) to ensure appropriate coordination between the manufacturing technology programs and industrial preparedness programs of the Department of Defense and similar programs undertaken by other departments and agencies of the Federal Government or by the private sector.

(c) Execution.—(1) The Secretary may carry out projects under the program through the Secretaries of the military departments and the heads of the Defense Agencies.

(2) In the establishment and review of requirements for an advanced manufacturing technology or process, the Secretary shall ensure the participation of those prospective technology users that are expected to be the users of that technology or process.

(3) The Secretary shall ensure that each project under the program for the development of an advanced manufacturing technology or process includes an implementation plan for the transition of that technology or process to the prospective technology users that will be the users of that technology or process.

(4) In the periodic review of a project under the program, the Secretary shall ensure participation by those prospective technology users that are the expected users for the technology or process being developed under the project.

(5) In order to promote increased dissemination and use of manufacturing technology throughout the national defense technology and industrial base, the Secretary shall seek, to the maximum extent practicable, the participation of manufacturers of manufacturing equipment in the projects under the program.

(6) In this subsection, the term "prospective technology users" means the following officials and elements of the Department of Defense:

(A) Program and project managers for defense weapon systems.

(B) Systems commands.

(D) Air logistics centers.

(E) Shipyards.

(d) Competition and Cost Sharing.—(1) In accordance with the policy stated in section 4008 of this title, competitive procedures shall be used for awarding all grants and entering into all contracts, cooperative agreements, and other transactions under the program.

(2) Under the competitive procedures used, the factors to be considered in the evaluation of each proposed grant, contract, cooperative agreement, or other transaction for a project under the program shall include the extent to which that proposed transaction provides for the proposed recipient to share in the cost of the project. For a project for which the Government receives an offer from only one offeror, the contracting officer shall negotiate the ratio of contract recipient cost to Government cost that represents the best value to the Government.

(e) Five-Year Strategic Plan.—(1) The Secretary shall develop a plan for the program that includes the following:

(A) The overall manufacturing technology goals, milestones, priorities, and investment strategy for the program.

(B) The objectives of, and funding for, the program for each military department and each Defense Agency that shall participate in the program during the period of the plan.

(2) The Secretary shall include in the plan mechanisms for assessing the effectiveness of the program under the plan.

(3) The Secretary shall update the plan not less frequently than once every four years.

(4) Each plan, and each update to the plan, shall cover a period of five fiscal years.

Editorial Notes

References in Text

Section 4008 of this title, referred to in subsec. (d)(1), probably should be a reference to section 4024 of this title. Section 4008 was originally enacted by transferring section 2374 of this title to that section by Pub. L. 116–283, div. A, title XVIII, §1841(c), Jan. 1, 2021, 134 Stat. 4243, effective Jan. 1, 2022. However, Pub. L. 117–81, div. A, title XVII, §1701(u)(2)(B), (D), Dec. 27, 2021, 135 Stat. 2151, amended Pub. L. 116–283, effective as if included therein, so as to eliminate that transfer, thereby omitting section 4008 before it took effect, and instead transferred section 2374 of this title to section 4024 of this title. See Codification note set out under section 4008 of this title.

Prior Provisions

A prior section 4841 was renumbered section 7841 of this title.

Amendments

2021—Pub. L. 116–283, §1869(b)(1), renumbered section 2521 of this title as this section.

Subsec. (a). Pub. L. 116–283, §1869(b)(2)(A), substituted "section 4811(a)" for "section 2501(a)".

Subsec. (d)(1). Pub. L. 116–283, §1869(b)(2)(B), substituted "section 4008" for "section 2374".

Subsecs. (e), (f). Pub. L. 116–283, §1869(c)(1), redesignated subsec. (f) as (e), transferred it to appear after subsec. (d) and transferred subsec. (e), related to Joint Defense Manufacturing Technology Panel, to section 4842 of this title.

2019—Subsec. (a). Pub. L. 116–92, §902(76)(A), substituted "The Under Secretary of Defense for Research and Engineering" for "The Under Secretary of Defense for Acquisition, Technology, and Logistics".

Subsec. (e)(4)(D). Pub. L. 116–92, §902(76)(B), substituted "Under Secretary of Defense for Research and Engineering" for "Under Secretary of Defense for Acquisition, Technology, and Logistics".

Subsec. (e)(5). Pub. L. 116–92, §902(76)(C), substituted "Under Secretary of Defense for Research and Engineering" for "Under Secretary of Defense for Acquisition, Technology, and Logistics".

2014—Subsec. (e)(5). Pub. L. 113–291, §212(a), substituted "one or more individuals designated by the Under Secretary of Defense for Acquisition, Technology, and Logistics for purposes of this paragraph" for "the Assistant Secretary of Defense for Research and Engineering".

Subsec. (f)(3). Pub. L. 113–291, §212(b), substituted "not less frequently than once every four years" for "on a biennial basis".

2013—Subsec. (e)(5). Pub. L. 112–239 substituted "Assistant Secretary of Defense for Research and Engineering" for "Director of Defense Research and Engineering".

2009—Subsecs. (e), (f). Pub. L. 111–84 added subsec. (e) and redesignated former subsec. (e) as (f).

2008—Subsec. (e). Pub. L. 110–181 added subsec. (e).

2003—Subsec. (e). Pub. L. 108–136 struck out heading and text of subsec. (e) which related to preparation and maintenance of a five-year plan for the Manufacturing Technology Program by the Secretary of Defense.

2002—Subsec. (e)(1). Pub. L. 107–314, §213(a), substituted "prepare and maintain a five-year plan for the program." for "prepare a five-year plan for the program which establishes—

"(A) the overall manufacturing technology goals, milestones, priorities, and investment strategy for the program; and

"(B) for each of the five fiscal years covered by the plan, the objectives of, and funding for the program by, each military department and each Defense Agency participating in the program."

Subsec. (e)(2). Pub. L. 107–314, §213(a), substituted "establish" for "include" in introductory provisions and amended subpars. (A) and (B) generally. Prior to amendment, text read as follows:

"(A) An assessment of the effectiveness of the program, including a description of all completed projects and status of implementation.

"(B) An assessment of the extent to which the costs of projects are being shared by the following:

"(i) Commercial enterprises in the private sector.

"(ii) Department of Defense program offices, including weapon system program offices.

"(iii) Departments and agencies of the Federal Government outside the Department of Defense.

"(iv) Institutions of higher education.

"(v) Other institutions not operated for profit.

"(vi) Other sources."

Subsec. (e)(3). Pub. L. 107–314, §213(b), substituted "biennially" for "annually" and "for each even-numbered fiscal year" for "for a fiscal year".

2001—Subsec. (a). Pub. L. 107–107 substituted "Under Secretary of Defense for Acquisition, Technology, and Logistics" for "Under Secretary of Defense for Acquisition and Technology".

2000—Pub. L. 106–398 renumbered section 2525 of this title as section 2521.

1999—Subsec. (a). Pub. L. 106–65, §216(a), in first sentence, inserted "through the development and application of advanced manufacturing technologies and processes that will reduce the acquisition and supportability costs of defense weapon systems and reduce manufacturing and repair cycle times across the life cycles of such systems" after "title".

Subsec. (b)(4). Pub. L. 106–65, §216(b), amended par. (4) generally. Prior to amendment, par. (4) read as follows: "to promote dual-use manufacturing processes;".

Subsec. (c)(2) to (6). Pub. L. 106–65, §216(c), added pars. (2) to (4), redesignated former par. (2) as (5), and added par. (6).

Subsec. (d). Pub. L. 106–65, §216(d), struck out "(A)" before "In accordance with" in par. (1), redesignated par. (1)(B) as par. (2), substituted "Under the competitive procedures used, the factors to be considered in the evaluation of each proposed grant, contract, cooperative agreement, or other transaction for a project under the program shall include the extent to which that proposed transaction provides for the proposed recipient to share in the cost of the project." for "For each grant awarded and each contract, cooperative agreement, or other transaction entered into on a cost-share basis under the program, the ratio of contract recipient cost to Government cost shall be determined by competitive procedures.", and struck out former pars. (2) and (3) which required grants, contracts, cooperative agreements, and other transactions to be awarded or entered into on a cost-sharing basis unless the Secretary of Defense made certain determinations and specified as a goal that at least 25 percent of the funds available for the program for each fiscal year be used for grants, contracts, cooperative agreements, and other transactions on a cost-share basis under which the ratio of recipient cost to Government cost was two to one.

Subsec. (e)(2)(A). Pub. L. 106–65, §216(e)(1), inserted ", including a description of all completed projects and status of implementation" before period at end.

Subsec. (e)(2)(C). Pub. L. 106–65, §216(e)(2), added subpar. (C).

1998—Subsec. (d)(1). Pub. L. 105–261, §213(a), designated existing provisions as subpar. (A), substituted "In accordance with the policy stated in section 2374 of this title, competitive" for "Competitive", and added subpar. (B).

Subsec. (d)(2). Pub. L. 105–261, §213(b), designated existing provisions as subpar. (A), redesignated former subpars. (A) to (C) as cls. (i) to (iii), respectively, and added subpars. (B) and (C).

Subsec. (d)(3). Pub. L. 105–261, §213(c)(2), substituted "As a goal, at least" for "At least" and "should" for "shall" and inserted at end "The Secretary of Defense, in coordination with the Secretaries of the military departments and upon recommendation of the Under Secretary of Defense for Acquisition and Technology, shall establish annual objectives to meet such goal."

Subsec. (d)(4). Pub. L. 105–261, §213(c)(1), struck out par. (4) which read as follows: "If the requirement of paragraph (3) cannot be met by July 15 of a fiscal year, the Under Secretary of Defense for Acquisition and Technology may waive the requirement and obligate the balance of the funds available for the program for that fiscal year on a cost-share basis under which the ratio of recipient cost to Government cost is less than two to one. Before implementing any such waiver, the Under Secretary shall submit to the Committee on Armed Services of the Senate and the Committee on National Security of the House of Representatives the reasons for the waiver."

Subsec. (e)(2). Pub. L. 105–261, §213(d), amended par. (2) generally. Prior to amendment, par. (2) read as follows: "The plan shall include an assessment of the effectiveness of the program."

1997—Subsec. (c)(2). Pub. L. 105–85, §211(a), amended par. (2) generally. Prior to amendment, par. (2) read as follows: "The Secretary shall seek, to the extent practicable, the participation of manufacturers of manufacturing equipment in the projects under the program."

Subsec. (e). Pub. L. 105–85, §211(b), added subsec. (e).

1996—Pub. L. 104–106, §276(a)(1), amended section catchline, as amended by Pub. L. 104–106, §§1503(a)(28), 1506, by striking out "Science and" after "Manufacturing".

Pub. L. 104–106, §1503(a)(28), substituted "Science and Technology Program" for "science and technology program" in section catchline.

Subsec. (a). Pub. L. 104–106, §276(a)(2), struck out "Science and" after "Manufacturing" and inserted after first sentence "The Secretary shall use the joint planning process of the directors of the Department of Defense laboratories in establishing the program."

Subsec. (b). Pub. L. 104–106, §1081(e), amended subsec. (b) generally. Prior to amendment, subsec. (b) read as follows: "Purpose.—The purpose of the program is to enhance the capability of industry to meet the manufacturing needs of the Department of Defense."

Subsec. (c). Pub. L. 104–106, §276(a)(3), designated existing provisions as par. (1) and added par. (2).

Subsec. (d)(2)(C). Pub. L. 104–106, §276(a)(4)(A), added subpar. (C).

Subsec. (d)(3), (4). Pub. L. 104–106, §276(a)(4)(B), added pars. (3) and (4).

1994—Pub. L. 103–337 substituted "Manufacturing science and technology program" for "Industrial Preparedness Manufacturing Technology Program" as section catchline and amended text generally. Prior to amendment, text read as follows: "The Secretary of Defense shall establish an Industrial Preparedness Manufacturing Technology program to enhance the capability of industry to meet the manufacturing needs of the Department of Defense."

Statutory Notes and Related Subsidiaries

Effective Date of 2021 Amendment

Amendment by Pub. L. 116–283 effective Jan. 1, 2022, with additional provisions for delayed implementation and applicability of existing law, see section 1801(d) of Pub. L. 116–283, set out as a note preceding section 3001 of this title.

Program for Advanced Manufacturing in the Indo-Pacific Region

Pub. L. 118–159, div. A, title III, §356, Dec. 23, 2024, 138 Stat. 1860, provided that:

"(a) Establishment.—Not later than 180 days after the date of the enactment of this Act [Dec. 23, 2024], the Secretary of Defense, acting through the Secretary of the Navy and in consultation with the Commander of the United States Indo-Pacific Command, shall carry out a program under which the Secretary shall establish an advanced manufacturing facility on or near a military installation within the area of responsibility of the United States Indo-Pacific Command for the purpose of—

"(1) meeting flexible manufacturing requirements to support the submarine, shipbuilding, and other defense activity industrial bases;

"(2) fostering partnerships between industry, local universities, and workforce training programs to develop a local workforce in the vicinity of such facility capable of meeting advanced manufacturing demands;

"(3) coordinating responses to requirements of the Submarine Industrial Base Task Force, the United States Indo-Pacific Command, the Innovation Capability and Modernization Office of the Department of Defense, the Industrial Base Analysis and Sustainment program of the Department, and other relevant defense organizations;

"(4) providing for the manufacturing of unmanned vehicles, including surface and underwater vehicles, and develops ship maintenance capabilities; and

"(5) responding to needs across the uniformed services and the defense industrial base.

"(b) Elements.—In carrying out subsection (a), the Secretary shall—

"(1) ensure that the advanced manufacturing facility under such subsection is capable of—

"(A) applying advanced manufacturing to small and large metal and composite structures;

"(B) manufacturing systems and components that—

"(i) use appropriate advanced manufacturing methods including hybrid and additive (for example, additive manufacturing, powder bed fusion manufacturing, cold spray manufacturing, or other similar manufacturing capabilities); and

"(ii) maintain a set of modern local machining systems with at least five-axis capability sufficient to support requirements;

"(C) maintaining a production capability across critical materials of the Navy in order to respond to emerging repair and production requirements during conflict; and

"(2) ensure broad workforce participation by establishing the facility either outside of a military installation (but very close to a military installation) or onboard a military installation with readily available access to a civilian trainee workforce.

"(c) Report.—Not later than December 1 of the year after the year during which a facility is established under subsection (a), the Secretary shall submit to the Committees on Armed Services of the Senate and the House of Representatives a report summarizing the actions taken under the program established under such subsection, including information on how the program is supporting initiatives of the United States Indo-Pacific Command.

"(d) Advanced Manufacturing Defined.—In this section, the term 'advanced manufacturing' means a manufacturing process using the following techniques:

"(1) Additive manufacturing.

"(2) Wire-arc additive manufacturing.

"(3) Powder bed fusion manufacturing.

"(4) Other similar manufacturing capabilities."

Consortium on Use of Additive Manufacturing for Defense Capability Development

Pub. L. 118–31, div. A, title II, §223, Dec. 22, 2023, 137 Stat. 191, as amended by Pub. L. 118–159, div. A, title II, §218, Dec. 23, 2024, 138 Stat. 1827, provided that:

"(a) Establishment.—Not later than 180 days after the date of the enactment of this Act [Dec. 22, 2023], the Secretary of Defense, in coordination with the Secretaries of the military departments, shall establish a consortium to facilitate the use of additive manufacturing for the development of capabilities for the Department of Defense. The consortium shall be known as the 'Consortium on Additive Manufacturing for Defense Capability Development' (referred to in this section as the 'Consortium').

"(b) Composition.—The Consortium shall be composed of qualified organizations, selected by the Secretary of Defense, that have functions and expertise relevant to additive manufacturing. At a minimum, the Consortium shall include the following:

"(1) Representation from one or more science and technology reinvention laboratories (as designated under section 4121 of title 10, United States Code) from each of the military departments, which may include—

"(A) from the Department of the Army—

"(i) the Combat Capabilities Development Command, Army Research Laboratory;

"(ii) the Combat Capabilities Development Command, Aviation and Missile Center;

"(iii) the Combat Capabilities Development Command, Armaments Center;

"(iv) the Combat Capabilities Development Command, Ground Vehicle Systems Center;

"(v) the Combat Capabilities Development Command, Soldier Center;

"(vi) the Combat Capabilities Development Command, Chemical Biological Center;

"(vii) the Combat Capabilities Development Command, Command, Control, Communications, Computers, Cyber, Intelligence, Surveillance, and Reconnaissance Center; and [sic]

"(viii) the Space and Missile Defense Command, Technical Center;

"(ix) the Engineer Research and Development Center;

"(x) the Medical Research and Development Command; and

"(xi) the Army Research Institute for the Behavioral and Social Sciences;

"(B) from the Department of the Navy—

"(i) the Naval Research Laboratory;

"(ii) the Office of Naval Research;

"(iii) the Naval Air Systems Command Warfare Centers;

"(iv) the Naval Sea Systems Command Warfare Centers;

"(v) the Naval Facilities Engineering Command, Engineering and Expeditionary Warfare Center;

"(vi) the Naval Medical Research Center; and

"(vii) the Naval Information Warfare Centers, Atlantic and Pacific; and

"(C) from the Department of the Air Force—

"(i) the Air Force Research Laboratory; and

"(ii) the Joint Warfighting Analysis Center.

"(2) Representation from one or more maintenance, logistics, or sustainment organizations from each of the military departments.

"(3) One or more organizations from private sector industry.

"(4) One or more institutions of higher education or other research institutions.

"(c) Activities.—The Consortium shall—

"(1) facilitate the use of additive manufacturing—

"(A) to significantly reduce logistic footprints, material costs, and delivery lead-times; and

"(B) to extended [sic] logistical supply chain dependencies that often challenge weapon system readiness for forward deployed warfighters;

"(2) develop standards and a certification process for the use of additive manufacturing in safety-critical applications, including additive material and part certification requirements for additive manufactured items intended for use in military vehicles;

"(3) evaluate, adapt, or apply the standards developed in the commercial sector, or new process approaches for additive manufacturing that may be of use to the Department of Defense;

"(4) as directed by an organization of the Department of Defense included in the Consortium, conduct reverse engineering (including testing and certification) for critical parts which may have limited sources of supply;

"(5) use data standards, common repositories, and information security to track, store, and secure technical data relating to additive manufacturing and ensure the interoperability of such data;

"(6) conduct comparative cost analyses for new and emerging additive manufacturing approaches, including assessments of life-cycle costs for tooling, training, and intellectual property needed to sustain such approaches; and

"(7) develop a process to certify new materials and processes for fabricating flight critical parts and initiate planning for a rapidly deployable additive manufacturing system that is capable of fabricating replacement safety-critical parts for military aircraft and unmanned aerial vehicles in environments where access to traditionally manufactured replacement parts is severely restricted."

Support for Research and Development of Bioindustrial Manufacturing Processes

Pub. L. 117–263, div. A, title II, §215, Dec. 23, 2022, 136 Stat. 2472, as amended by Pub. L. 118–31, div. A, title II, §216, Dec. 22, 2023, 137 Stat. 185, provided that:

"(a) Authorization.—Subject to the availability of appropriations, the Secretary of Defense shall provide support for the development of a network of bioindustrial manufacturing facilities to conduct research and development to improve the ability of the industrial base to assess, validate, and scale new, innovative bioindustrial manufacturing processes for the production of chemicals, materials, and other products necessary to support national security or secure fragile supply chains.

"(b) Form of Support.—The support provided under subsection (a) may consist of—

"(1) providing funding to one or more existing facilities or the establishment of new facilities—

"(A) to support the research and development of bioindustrial manufacturing processes; or

"(B) to otherwise expand the bioindustrial manufacturing capabilities of such facilities;

"(2) the establishment of dedicated facilities within one or more bioindustrial manufacturing facilities to serve as regional hubs for the research, development, and the scaling of bioindustrial manufacturing processes and products to higher levels of production; or

"(3) designating a bioindustrial manufacturing facility to serve as the lead entity responsible for integrating a network of pilot and intermediate scale bioindustrial manufacturing facilities.

"(c) Activities.—A facility that receives support under subsection (a) shall carry out activities relating to the research, development, test, and evaluation of innovative bioindustrial manufacturing processes and the scaling of bioindustrial manufacturing products to higher levels of production, which may include—

"(1) research on the use of bioindustrial manufacturing to create materials such as polymers, coatings, resins, commodity chemicals, pharmaceutical biologics and associated precursor materials, and other materials with fragile supply chains;

"(2) demonstration projects to evaluate bioindustrial manufacturing processes and technologies;

"(3) activities to scale bioindustrial manufacuring [sic] processes and products to higher levels of production;

"(4) strategic planning for infrastructure and equipment investments for bioindustrial manufacturing of defense-related materials;

"(5) analyses of bioindustrial manufactured products and validation of the application of biological material used as input to new and existing processes to aid in future investment strategies and the security of critical supply chains;

"(6) the selection, construction, and operation of pilot and intermediate scale bioindustrial manufacturing facilities;

"(7) development and management of a network of facilities to scale production of bioindustrial products;

"(8) activities to address workforce needs in bioindustrial manufacturing;

"(9) establishing an interoperable, secure, digital infrastructure for collaborative data exchange across entities in the bioindustrial manufacturing community, including government agencies, industry, and academia;

"(10) developing and implementing digital tools, process security and assurance capabilities, cybersecurity protocols, and best practices for data storage, sharing and analysis; and

"(11) such other activities as the Secretary of Defense determines appropriate.

"(d) Considerations.—In determining the number, type, and location of facilities to support under subsection (a), the Secretary of Defense shall consider—

"(1) how the facilities may complement each other or increase production levels by functioning together as a network;

"(2) how to geographically distribute support to such facilities—

"(A) to maximize access to biological material needed as an input to bioindustrial manufacturing processes;

"(B) to leverage available industrial and academic expertise, including workforce and human capital;

"(C) to leverage relevant domestic infrastructure required to secure supply chains for chemicals and other materials;

"(D) to leverage access to venture capital and private sector finance expertise and funding instruments; and

"(E) to complement the capabilities of similar facilities; and

"(3) how the activities supported under this section can be coordinated with relevant activities of other departments and agencies of the Federal Government.

"(e) Initial Concept Plan Required.—

"(1) In general.—Not later than 180 days after the date of the enactment of this Act [Dec. 23, 2022], the Secretary of Defense shall submit to the congressional defense committees [Committees on Armed Services and Appropriations of the Senate and the House of Representatives] and the National Security Commission on Emerging Biotechnology an initial concept plan for the implementation of this section that includes—

"(A) an assessment of capacity scaling needs to determine if, and what type of, additional bioindustrial manufacturing facilities may be needed to meet the needs of the Department of Defense;

"(B) a description of types, relative sizes, and locations of the facilities the Secretary intends to establish or support under this section;

"(C) a general description of the focus of each facility, including the types of bioindustrial manufacturing equipment, if any, that are expected to be procured for each such facility;

"(D) a general description of how the facilities will work as a network to maximize the diversity of bioindustrial products available to be produced by the network;

"(E) an explanation of how the network will support the establishment and maintenance of the bioindustrial manufacturing industrial base; and

"(F) an explanation of how the Secretary intends to ensure that bioindustrial manufacturing activities conducted under this section are modernized digitally, including through—

"(i) the use of data automation to represent processes and products as models and simulations; and

"(ii) the implementation of measures to address cybersecurity and process assurance concerns.

"(2) Briefings.—Not later than 180 days after the date of the submittal of the plan under paragraph (1), and annually thereafter for five years, the Secretary of Defense shall provide to the congressional defense committees a briefing on the Secretary's progress in implementing the plan.

"(f) Bioindustrial Manufacturing Defined.—In this section, the term 'bioindustrial manufacturing' means the use of living organisms, cells, tissues, enzymes, or cell-free systems to produce materials and products for non-pharmaceutical applications."

Administration of Manufacturing Innovation Institutes Funded by the Department of Defense

Pub. L. 116–92, div. A, title II, §227, Dec. 20, 2019, 133 Stat. 1270, provided that:

"(a) In General.—The Secretary of Defense shall make such changes to the administration of covered institutes so as—

"(1) to encourage covered institutes to leverage existing workforce development programs across the Federal Government and State governments in order to build successful workforce development programs;

"(2) to develop metrics to evaluate the workforce development performed by the covered institutes, including metrics on job quality, career pathways, wages and benefits, and efforts to support veterans, and progress in aligning workforce skillsets with the current and long-term needs of the Department of Defense and the defense industrial base;

"(3) to allow metrics to vary between covered institutes and be updated and evaluated continuously in order to more accurately evaluate covered institutes with different goals and missions;

"(4) to encourage covered institutes to consider developing technologies that were previously funded by Federal Government investment for early-stage research and development and expand cross-government coordination and collaboration to achieve this goal;

"(5) to provide an opportunity for increased Department of Defense input and oversight from senior-level military and civilian personnel on future technology roadmaps produced by covered institutes;

"(6) to reduce the barriers to collaboration between and among multiple covered institutes;

"(7) to use contracting vehicles that can increase flexibility, reduce barriers for contracting with subject-matter experts and small and medium enterprises, enhance partnerships between covered institutes, and reduce the time to award contracts at covered institutes; and

"(8) to overcome barriers to the adoption of manufacturing processes and technologies developed by the covered institutes by the defense and commercial industrial base, particularly small and medium enterprises, by engaging with public and private sector partnerships and appropriate government programs and activities, including the Hollings Manufacturing Extension Partnership.

"(b) Coordination With Other Activities.—The Secretary shall carry out this section in coordination with activities undertaken under—

"(1) the Manufacturing Technology Program established under section 2521 of title 10, United States Code [now 10 U.S.C. 4841, 4842];

"(2) the Manufacturing Engineering Education Program established under section 2196 of such title [now 10 U.S.C. 4843];

"(3) the Defense Manufacturing Community Support Program established under section 846 of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Public Law 115–232) [10 U.S.C. 4811 note];

"(4) manufacturing initiatives of the Secretary of Commerce, the head of the National Office of the Manufacturing USA Network, the Secretary of Energy, and such other government and private sector organizations as the Secretary of Defense considers appropriate; and

"(5) such other activities as the Secretary considers appropriate.

"(c) Definition of Covered Institute.—In this section, the term 'covered institute' means a manufacturing innovation institute that is funded by the Department of Defense."

Advanced Manufacturing Activities

Pub. L. 115–232, div. A, title II, §229, Aug. 13, 2018, 132 Stat. 1688, provided that:

"(a) Designation.—The Under Secretary of Defense for Acquisition and Sustainment and the Under Secretary of Defense for Research and Engineering shall jointly, in coordination with Secretaries of the military departments, establish at least one activity per military service to demonstrate advanced manufacturing techniques and capabilities at depot-level activities or military arsenal facilities of the military departments.

"(b) Purposes.—The activities established pursuant to subsection (a) shall—

"(1) support efforts to implement advanced manufacturing techniques and capabilities;

"(2) identify improvements to sustainment methods for component parts and other logistics needs;

"(3) identify and implement appropriate information security protections to ensure security of advanced manufacturing;

"(4) aid in the procurement of advanced manufacturing equipment and support services;

"(5) enhance partnerships between the defense industrial base and Department of Defense laboratories, academic institutions, and industry; and

"(6) to the degree practicable, include an educational or training component to build an advanced manufacturing workforce.

"(c) Cooperative Agreements and Partnerships.—

"(1) In general.—The Under Secretaries may enter into a cooperative agreement and use public-private and public-public partnerships to facilitate development of advanced manufacturing techniques in support of the defense industrial base.

"(2) Requirements.—A cooperative agreement entered into under paragraph (1) and a partnership used under such paragraph shall facilitate—

"(A) development and implementation of advanced manufacturing techniques and capabilities;

"(B) appropriate sharing of information in the adaptation of advanced manufacturing, including technical data rights;

"(C) implementation of appropriate information security protections into advanced manufacturing tools and techniques; and

"(D) support of necessary workforce development.

"(d) Authorities.—In carrying out this section, the Under Secretaries may use the following authorities:

"(1) Section 2196 of title 10, United States Code [now 10 U.S.C. 4843], relating to the Manufacturing Engineering Education Program.

"(2) Section 2368 of such title [now 10 U.S.C. 4124], relating to centers for science, technology, and engineering partnership.

"(3) Section 2374a of such title [now 10 U.S.C. 4025], relating to prizes for advanced technology achievements.

"(4) Section 2474 of such title, relating to centers of industrial and technical excellence.

"(5) Section 2521 of such title [now 10 U.S.C. 4841, 4842], relating to the Manufacturing Technology Program.

"(6) Section 12 of the Stevenson-Wydler Technology Innovation Act of 1980 (15 U.S.C. 3710a) and section 6305 of title 31, United States Code, relating to cooperative research and development agreements.

"(7) Such other authorities as the Under Secretaries considers appropriate."

Limitation on Use of Funds for Defense-Wide Manufacturing Science and Technology Program

Pub. L. 110–181, div. A, title II, §214, Jan. 28, 2008, 122 Stat. 36, as amended by Pub. L. 111–383, div. A, title IX, §901(l)(2), Jan. 7, 2011, 124 Stat. 4326; Pub. L. 112–239, div. A, title X, §1076(c)(2)(F), Jan. 2, 2013, 126 Stat. 1950, provided that: "No funds available to the Office of the Secretary of Defense for any fiscal year may be obligated or expended for the defense-wide manufacturing science and technology program unless the Assistant Secretary of Defense for Research and Engineering ensures each of the following:

"(1) A component of the Department of Defense has requested and evaluated—

"(A) competitive proposals, for each project under the program that is not a project covered by subparagraph (B); and

"(B) proposals from as many sources as is practicable under the circumstances, for a project under the program if the disclosure of the needs of the Department of Defense with respect to that project would compromise the national security.

"(2) Each project under the program is carried out—

"(A) in accordance with the statutory requirements of the Manufacturing Technology Program established by section 2521 of title 10, United States Code [now 10 U.S.C. 4841, 4842]; and

"(B) in compliance with all requirements of any directive that applies to manufacturing technology.

"(3) An implementation plan has been developed."

[Pub. L. 111–383, div. A, title IX, §901(l)(2), Jan. 7, 2011, 124 Stat. 4326, which directed amendment of section 214 of Pub. L. 110–181, set out above, by substituting "Assistant Secretary of Defense for Research and Engineering" for "Director of Defense Research and Engineering", was executed by making the substitution for "Director, Defense Research and Engineering," to reflect the probable intent of Congress.]

Initial Development and Submission of Plan

Pub. L. 110–181, div. A, title II, §238(b), Jan. 28, 2008, 122 Stat. 48, provided that:

"(1) Development.—The Secretary of Defense shall develop the strategic plan required by subsection (e) of section 2521 of title 10, United States Code [now 10 U.S.C. 4841(e)] (as added by subsection (a) of this section), so that the plan goes into effect at the beginning of fiscal year 2009.

"(2) Submission.—Not later than the date on which the budget of the President for fiscal year 2010 is submitted to Congress under section 1105 of title 31, United States Code, the Secretary shall submit to the Committee on Armed Services of the Senate and the Committee on Armed Services of the House of Representatives the plan specified in paragraph (1)."

High-Performance Defense Manufacturing Technology Research and Development

Pub. L. 109–163, div. A, title II, subtitle D, Jan. 6, 2006, 119 Stat. 3175, as amended by Pub. L. 112–239, div. A, title X, §1076(c)(2)(A)(ii), Jan. 2, 2013, 126 Stat. 1949, provided that:

"SEC. 241. PILOT PROGRAM FOR IDENTIFICATION AND TRANSITION OF ADVANCED MANUFACTURING PROCESSES AND TECHNOLOGIES.

"(a) Pilot Program Required.—The Under Secretary of Defense for Acquisition, Technology, and Logistics shall conduct a pilot program under the authority of section 2521 of title 10, United States Code [now 10 U.S.C. 4841], to identify and transition advanced manufacturing processes and technologies the utilization of which would achieve significant productivity and efficiency gains in the defense manufacturing base.

"(b) Consideration of Defense Priorities.—In carrying out subsection (a), the Under Secretary shall take into consideration the defense priorities established in the most current Joint Warfighting Science and Technology plan, as required under section 270 of the National Defense Authorization Act for Fiscal Year 1997 (Public Law 104–201; [former] 10 U.S.C. 2501 note).

"(c) Identification for Transition.—In identifying manufacturing processes and technologies for transition to the defense manufacturing base under the pilot program, the Under Secretary shall select the most promising transformational technologies and manufacturing processes, in consultation with the Assistant Secretary of Defense for Research and Engineering, the Joint Defense Manufacturing Technology Panel, and other such entities as may be appropriate, including the Director of the Small Business Innovation Research Program.

"SEC. 242. TRANSITION OF TRANSFORMATIONAL MANUFACTURING PROCESSES AND TECHNOLOGIES TO DEFENSE MANUFACTURING BASE.

"(a) Prototypes and Test Beds.—The Under Secretary of Defense for Acquisition, Technology, and Logistics shall undertake the development of prototypes and test beds to validate the manufacturing processes and technologies selected for transition under the pilot program under section 241.

"(b) Diffusion of Enhancements.—The Under Secretary shall seek the cooperation of industry in adopting such manufacturing processes and technologies through the following:

"(1) The Manufacturing Extension Partnership Program.

"(2) The identification of incentives for industry to incorporate and utilize such manufacturing processes and technologies.

"SEC. 243. MANUFACTURING TECHNOLOGY STRATEGIES.

"(a) In General.—The Under Secretary of Defense for Acquisition, Technology, and Logistics may—

"(1) identify an area of technology where the development of an industry-prepared roadmap for new manufacturing and technology processes applicable to defense manufacturing requirements would be beneficial to the Department of Defense; and

"(2) establish a task force, and act in cooperation, with the private sector to map the strategy for the development of manufacturing processes and technologies needed to support technology development in the area identified under paragraph (1).

"(b) Commencement of Roadmapping.—The Under Secretary shall commence any roadmapping identified pursuant to subsection (a)(1) not later than January 2007.

"SEC. 244. REPORT.

"(a) In General.—Not later than December 31, 2007, the Under Secretary of the Defense for Acquisition, Technology, and Logistics shall submit to the congressional defense committees [Committees on Armed Services and Appropriations of the Senate and the House of Representatives] a report on the actions undertaken by the Under Secretary under this subtitle during fiscal year 2006.

"(b) Elements.—The report under subsection (a) shall include—

"(1) a comprehensive description of the actions undertaken under this subtitle during fiscal year 2006;

"(2) an assessment of effectiveness of such actions in enhancing research and development on manufacturing technologies and processes, and the implementation of such within the defense manufacturing base; and

"(3) such recommendations as the Under Secretary considers appropriate for additional actions to be undertaken in order to increase the effectiveness of the actions undertaken under this subtitle in enhancing manufacturing activities within the defense manufacturing base.

"SEC. 245. DEFINITIONS.

"In this subtitle:

"(1) Defense manufacturing base.—The term 'defense manufacturing base' includes any supplier of the Department of Defense, including a supplier of raw materials.

"(2) Manufacturing extension partnership program.—The term 'Manufacturing Extension Partnership Program' means the Manufacturing Extension Partnership Program of the Department of Commerce.

"(3) Small business innovation research program.—The term 'Small Business Innovation Research Program' has the meaning given that term in section 2500(11) of title 10, United States Code [now 10 U.S.C. 4801(11)]."

Participation in Manufacturing Extension Program

Pub. L. 108–87, title VIII, §8062, Sept. 30, 2003, 117 Stat. 1086, provided that: "Notwithstanding any other provision of law, the Naval shipyards of the United States shall be eligible to participate in any manufacturing extension program financed by funds appropriated in this or any other Act or hereafter in any other Act."

Similar provisions were contained in the following prior appropriation acts:

Pub. L. 107–248, title VIII, §8063, Oct. 23, 2002, 116 Stat. 1550.

Pub. L. 107–117, div. A, title VIII, §8068, Jan. 10, 2002, 115 Stat. 2262.

Pub. L. 106–259, title VIII, §8067, Aug. 9, 2000, 114 Stat. 689.

Pub. L. 106–79, title VIII, §8070, Oct. 25, 1999, 113 Stat. 1245.

Pub. L. 105–262, title VIII, §8070, Oct. 17, 1998, 112 Stat. 2312.

Pub. L. 105–56, title VIII, §8076, Oct. 8, 1997, 111 Stat. 1236.

Pub. L. 104–208, div. A, title I, §101(b) [title VIII, §8085], Sept. 30, 1996, 110 Stat. 3009–71, 3009-105.

Pub. L. 104–61, title VIII, §8064, Dec. 1, 1995, 109 Stat. 664.

Pub. L. 103–335, title VIII, §8071, Sept. 30, 1994, 108 Stat. 2635.

Pub. L. 103–139, title VIII, §8083A, Nov. 11, 1993, 107 Stat. 1459.

Pub. L. 102–396, title IX, §9112, Oct. 6, 1992, 106 Stat. 1929.

§4842. Joint Defense Manufacturing Technology Panel

(a) There is in the Department of Defense the Joint Defense Manufacturing Technology Panel.

(b)(1) The Chair of the Joint Defense Manufacturing Technology Panel shall be the head of the Panel. The Chair shall be appointed, on a rotating basis, from among the appropriate personnel of the military departments and Defense Agencies with manufacturing technology programs.

(2) The Panel shall be composed of at least one individual from among appropriate personnel of each military department and Defense Agency with manufacturing technology programs. The Panel may include as ex-officio members such individuals from other government organizations, academia, and industry as the Chair considers appropriate.

(1) To identify and integrate requirements for the program.

(2) To conduct joint planning for the program.

(3) To develop joint strategies for the program.

(d) In carrying out the purposes specified in subsection (c), the Panel shall perform the functions as follows:

(1) Conduct comprehensive reviews and assessments of defense-related manufacturing issues being addressed by the manufacturing technology programs and related activities of the Department of Defense.

(2) Execute strategic planning to identify joint planning opportunities for increased cooperation in the development and implementation of technological products and the leveraging of funding for such purposes with the private sector and other government agencies.

(3) Ensure the integration and coordination of requirements and programs under the program with the Office of the Secretary of Defense and other national-level initiatives, including the establishment of information exchange processes with other government agencies, private industry, academia, and professional associations.

(4) Conduct such other functions as the Under Secretary of Defense for Research and Engineering shall specify.

(e) The Panel shall report to and receive direction from one or more individuals designated by the Under Secretary of Defense for Research and Engineering for purposes of this subsection on manufacturing technology issues of multi-service concern and application.

(f) The administrative expenses of the Panel shall be borne by each military department and Defense Agency with manufacturing technology programs in such manner as the Panel shall provide.

(Added and amended Pub. L. 116–283, div. A, title XVIII, §1869(c)(1)(B), (2), Jan. 1, 2021, 134 Stat. 4283, 4284.)

Editorial Notes

Codification

The text of subsec. (e), related to Joint Defense Manufacturing Technology Panel, of section 4841 of this title, which was transferred to this section by Pub. L. 116–283, §1869(c)(1)(B), was based on Pub. L. 111–84, div. A, title II, §212(2), Oct. 28, 2009, 123 Stat. 2225; Pub. L. 112–239, div. A, title X, §1076(c)(2)(A)(i), Jan. 2, 2013, 126 Stat. 1949; Pub. L. 113–291, div. A, title II, §212(a), Dec. 19, 2014, 128 Stat. 3325; Pub. L. 116–92, div. A, title IX, §902(76)(B), (C), Dec. 20, 2019, 133 Stat. 1552.

Prior Provisions

A prior section 4842 was renumbered section 7842 of this title.

Amendments

2021—Pub. L. 116–283, §1869(c)(2)(A), (B), struck out subsec. (e) designation and heading and redesignated pars. (1) to (6) as subsecs. (a) to (f), respectively.

Pub. L. 116–283, §1869(c)(1)(B), transferred subsec. (e), related to Joint Defense Manufacturing Technology Panel, of section 4841 of this title to this section and added section catchline.

Subsec. (b). Pub. L. 116–283, §1869(c)(2)(C), redesignated subpars. (A) and (B) as pars. (1) and (2), respectively.

Subsec. (c). Pub. L. 116–283, §1869(c)(2)(D), redesignated subpars. (A) to (C) as pars. (1) to (3), respectively.

Subsec. (d). Pub. L. 116–283, §1869(c)(2)(E), substituted "subsection (c)" for "paragraph (3)" in introductory provisions and redesignated subpars. (A) to (D) as pars. (1) to (4), respectively.

Subsec. (e). Pub. L. 116–283, §1869(c)(2)(F), substituted "this subsection" for "this paragraph".

Statutory Notes and Related Subsidiaries

Effective Date

Section and amendment by Pub. L. 116–283 effective Jan. 1, 2022, with additional provisions for delayed implementation and applicability of existing law, see section 1801(d) of Pub. L. 116–283, set out as an Effective Date of 2021 Amendment note preceding section 3001 of this title.

§4843. Manufacturing engineering education program

(a) Establishment of Manufacturing Engineering Education Program.—(1) The Secretary of Defense shall establish a program under which the Secretary makes grants or other awards to support—

(A) the enhancement of existing programs in manufacturing engineering education to further a mission of the department; or

(B) the establishment of new programs in manufacturing engineering education that meet such requirements.

(2) Grants and awards under this section may be made to industry, not-for-profit institutions, institutions of higher education, or to consortia of such institutions or industry.

(3) The Secretary shall establish the program in consultation with the Secretary of Education, the Director of the National Science Foundation, the Director of the Office of Science and Technology Policy, and the secretaries of such other relevant Federal agencies as the Secretary considers appropriate.

(4) The Secretary shall ensure that the program is coordinated with Department programs associated with advanced manufacturing.

(5) The program shall be known as the "Manufacturing Engineering Education Program".

(b) Geographical Distribution of Grants and Awards.—In awarding grants and other awards under this subsection, the Secretary shall, to the maximum extent practicable, avoid geographical concentration of awards.

(c) Covered Programs.—A program of engineering education supported pursuant to this section shall meet the requirements of this section.

(d) Components of Program.—The program of education for which such a grant is made shall be a consolidated and integrated multidisciplinary program of education with an emphasis on the following components:

(1) Multidisciplinary instruction that encompasses the total manufacturing engineering enterprise and that may include—

(A) manufacturing engineering education and training through classroom activities, laboratory activities, thesis projects, individual or team projects, internships, cooperative work-study programs, and interactions with industrial facilities, consortia, or such other activities and organizations in the United States and foreign countries as the Secretary considers appropriate;

(B) faculty development programs;

(C) recruitment of educators highly qualified in manufacturing engineering to teach or develop manufacturing engineering courses;

(D) presentation of seminars, workshops, and training for the development of specific manufacturing engineering skills;

(E) activities involving interaction between students and industry, including programs for visiting scholars, personnel exchange, or industry executives;

(F) development of new, or updating and modification of existing, manufacturing curriculum, course offerings, and education programs;

(G) establishment of programs in manufacturing workforce training;

(H) establishment of joint manufacturing engineering programs with defense laboratories and depots; and

(I) expansion of manufacturing training and education programs and outreach for members of the armed forces, dependents and children of such members, veterans, and employees of the Department of Defense.

(2) Opportunities for students to obtain work experience in manufacturing through such activities as internships, summer job placements, or cooperative work-study programs.

(3) Faculty and student engagement with industry that is directly related to, and supportive of, the education of students in manufacturing engineering because of—

(A) the increased understanding of manufacturing engineering challenges and potential solutions; and

(B) the enhanced quality and effectiveness of the instruction that result from that increased understanding.

(e) Proposals.—The Secretary of Defense shall solicit proposals for grants and other awards to be made pursuant to this section for the support of programs of manufacturing engineering education that are consistent with the purposes of this section.

(f) Merit Competition.—Applications for awards shall be evaluated on the basis of merit pursuant to competitive procedures prescribed by the Secretary.

(g) Selection Criteria.—The Secretary may select a proposal for an award pursuant to this section if the proposal, at a minimum, does each of the following:

(1) Contains innovative approaches for improving engineering education in manufacturing technology.

(2) Demonstrates a strong commitment by the proponents to apply the resources necessary to achieve the objectives for which the award is to be made.

(3) Provides for effective engagement with industry or government organizations that supports the instruction to be provided in the proposed program and is likely to improve manufacturing engineering and technology.

(4) Demonstrates a significant level of involvement of United States industry in the proposed instructional and research activities.

(5) Is likely to attract superior students and promote careers in manufacturing engineering.

(6) Proposes to involve fully qualified personnel who are experienced in manufacturing engineering education and technology.

(7) Proposes a program that, within three years after the award is made, is likely to attract from sources other than the Federal Government the financial and other support necessary to sustain such program.

(8) Proposes to achieve a significant level of participation by women, members of minority groups, and individuals with disabilities through active recruitment of students from among such persons.

(9) Trains students in advanced manufacturing and in relevant emerging technologies and production processes.

(h) Institution of Higher Education Defined.—In this section, the term "institution of higher education" has the meaning given such term in section 101(a) of the Higher Education Act of 1965 (20 U.S.C. 1001(a)).

(Added Pub. L. 102–190, div. A, title VIII, §825(a)(1), Dec. 5, 1991, 105 Stat. 1438, §2196; amended Pub. L. 114–328, div. A, title II, §215, Dec. 23, 2016, 130 Stat. 2048; renumbered §4843, Pub. L. 116–283, div. A, title XVIII, §1869(d)(1), as added Pub. L. 117–81, div. A, title XVII, §1701(p)(1)(A), (B), Dec. 27, 2021, 135 Stat. 2148.)

Editorial Notes

Codification

Pub. L. 116–283, §1869(d), which had initially directed the transfer of section 2522 of this title to this section, was amended by Pub. L. 117–81, §1701(p)(1)(A), (B), and, after that amendment, such transfer was no longer directed. Instead, Pub. L. 116–283, as amended by Pub. L. 117–81, transferred section 2196 of this title to this section and section 2522 of this title to section 4845.

Amendments

2021—Pub. L. 116–283, §1869(d)(1), as added by Pub. L. 117–81, §1701(p)(1)(A), (B), renumbered section 2196 of this title as this section.

2016—Pub. L. 114–328 amended section generally. Prior to amendment, section related to grants for manufacturing engineering education.

Statutory Notes and Related Subsidiaries

Effective Date of 2021 Amendment

Amendment by Pub. L. 117–81 applicable as if included in the enactment of title XVIII of Pub. L. 116–283 as enacted, see section 1701(a)(2) of Pub. L. 117–81, set out in a note preceding section 3001 of this title and note below.

Implementation of Grant Program; Priority in Funding

Pub. L. 102–190, div. A, title VIII, §825(b), Dec. 5, 1991, 105 Stat. 1442, provided that: "Within one year after the date of the enactment of this Act [Dec. 5, 1991], the Secretary of Defense, in consultation with the Director of the National Science Foundation, shall award grants under section 2196 of title 10, United States Code [now 10 U.S.C. 4843] (as added by subsection (a)), to institutions of higher education throughout the United States."

§4844. Manufacturing experts in the classroom

(a) Establishment of Program.—The Secretary of Defense, in consultation with the Secretary of Education and the Secretary of Commerce, shall conduct a program to support the following activities of one or more manufacturing experts at institutions of higher education:

(1) Identifying the education and training requirements of United States manufacturing firms located in the same geographic region as an institution participating in the program.

(2) Assisting in the development of teaching curricula for classroom and in-factory education and training classes at such an institution.

(3) Teaching such classes and overseeing the teaching of such classes by others.

(4) Improving the knowledge and expertise of permanent faculty and staff of such an institution.

(5) Marketing the programs and facilities of such an institution to firms referred to in paragraph (1).

(6) Coordinating the activities described in the other provisions of this subsection with other programs conducted by the Federal Government, any State, any local government, or any private, nonprofit organization to modernize United States manufacturing firms, especially the regional centers for the transfer of manufacturing technology and programs receiving financial assistance under section 4843 of this title.

(b) Merit Competition.—Applications for assistance under this section shall be evaluated on the basis of merit pursuant to competitive procedures prescribed by the Secretary.

(c) Selection Criteria.—The Secretary shall select institutions for the award of financial assistance under this section from among institutions submitting applications for such assistance that—

(1) demonstrate that the proposed activities are of an appropriate scale and a sufficient quality to ensure long term improvement in the applicant's capability to serve the education and training needs of United States manufacturing firms in the same region as the applicant;

(2) demonstrate a significant level of industry involvement and support;

(3) demonstrate attention to the needs of any United States industries that supply manufactured products to the Department of Defense or to a contractor of the Department of Defense; and

(4) meet such other criteria as the Secretary may prescribe.

(d) Federal Support.—The amount of financial assistance furnished to an institution under this section may not exceed 50 percent of the estimated cost of carrying out the activities proposed to be supported in part with such financial assistance for the period for which the assistance is to be provided. In no event may the amount of the financial assistance provided to an institution exceed $250,000 per year. The period for which financial assistance is provided an institution under this section shall be at least two years unless such assistance is earlier terminated for cause determined by the Secretary.

(e) Manufacturing Expert Defined.—In this section, the term "manufacturing expert" means manufacturing managers and workers having experience in the organization of production and education and training needs and other experts in manufacturing.

(Added Pub. L. 102–190, div. A, title VIII, §825(a)(1), Dec. 5, 1991, 105 Stat. 1440, §2197; amended Pub. L. 102–484, div. D, title XLII, §4238(a), (b)(1), Oct. 23, 1992, 106 Stat. 2694; renumbered §4844 and amended Pub. L. 116–283, div. A, title XVIII, §1869(d), as added Pub. L. 117–81, div. A, title XVII, §1701(p)(1), Dec. 27, 2021, 135 Stat. 2148.)

Editorial Notes

Amendments

2021—Pub. L. 116–283, §1869(d)(1), as added by Pub. L. 117–81, §1701(p)(1)(A), (B), renumbered section 2197 of this title as this section.

Subsec. (a)(6). Pub. L. 116–283, §1869(d)(2), as added by Pub. L. 117–81, §1701(p)(1)(C), substituted "section 4843" for "section 2196".

1992—Pub. L. 102–484, §4238(b)(1), substituted "experts" for "managers" in section catchline.

Subsec. (a). Pub. L. 102–484, §4238(a)(1), struck out "managers and" after "manufacturing" in introductory provisions.

Subsec. (e). Pub. L. 102–484, §4238(a)(2), added subsec. (e).

Statutory Notes and Related Subsidiaries

Effective Date of 2021 Amendment

§4845. Armament retooling and manufacturing

The Secretary of the Army is authorized by chapter 764 of this title to carry out programs for the support of armaments retooling and manufacturing in the national defense industrial and technology base.

(Added Pub. L. 106–398, §1 [[div. A], title III, §344(c)(1)(B)], Oct. 30, 2000, 114 Stat. 1654, 1654A-71, §2522; amended Pub. L. 115–232, div. A, title VIII, §809(a), Aug. 13, 2018, 132 Stat. 1840; renumbered §4845, Pub. L. 116–283, div. A, title XVIII, §1869(d)(1), as added Pub. L. 117–81, div. A, title XVII, §1701(p)(1)(A), (B), Dec. 27, 2021, 135 Stat. 2148.)

Editorial Notes

Amendments

2021—Pub. L. 116–283, §1869(d)(1), as added by Pub. L. 117–81, §1701(p)(1)(A), (B), renumbered section 2522 of this title as this section.

2018—Pub. L. 115–232 substituted "chapter 764" for "chapter 434".

Statutory Notes and Related Subsidiaries

Effective Date of 2021 Amendment

Effective Date of 2018 Amendment

Amendment by Pub. L. 115–232 effective Feb. 1, 2019, with provision for the coordination of amendments and special rule for certain redesignations, see section 800 of Pub. L. 115–232, set out as a note preceding section 3001 of this title.